INVERTER RESET

1. To reset the inverter you need to flip the red switch under the inverter display to the OFF position

2. Turn the black knob on the inverter disconnect to the OFF position

3. When the system powers off completely turn the knob to the ON position.

4. We will now want to pair the optimizers to the inverter. To do this hold the green button under the inverter till it says pairing

5. Release the green button and flip the red switch to the ON position and pairing will commence

6. Once paired enter the communication menu and select server Zigbee

7. On the gateway device hold the red button till all the lights turn on, release the button and the gateway will start searching fro the invert

DOWNLOAD THE GUIDE

 

ZIGBEE WIRELESS GATEWAY RESET

1. Connect the Zigbee to a power outlet and press the red   button till all the lights on the Zigbee are On

2. Release the green button and all the lights will start blinking to search for the inverter

3. When the zigbee is found the inverter will display “Status: <OK>”. The “Link” Light on the Zigbee will start blinking once every 5 seconds

4. Connect the Zigbee to the internet router using an Ethernet cable. The WiFi lights should be all green and the Link light will blink once every 5 second

DOWNOAD THE GUIDE

 

SOLAR EDGE INVERTER COMMUNICATIONS SETTINGS

1. Hold the green button to enter the Menu

2. Press the green button to select communication, the hold the green button to enter the communication menu

3. From the communication menu select server and change the server to Zigbee. Select “Zigbee Conf”

4. Under the Zigbee menu select “Load ZB Defaults” and select YES then exit

DOWNOAD THE GUIDE